Steel plate and sheet

The steel plates, sheets we can produce:

  • Hot rolled plates, Cold Rolled sheets
  • Spring, carbon and alloy plates
  • Carburizing plates
  • High-manganese wear-resistant steel sheets
  • Chromium heat-resistant sheets, chromium-nickel sheets with aluminum, silicon, molybdenum, titanium additives etc.
  • Heat and creep resistant steel sheets
  • Stainless, acid-resistant, corrosion-resistant plate, sheets
  • Alloy sheets for heat-chemical treatment
  • Corrugated Corten sheets resistant to atmospheric corrosion
  • Manganese spring sheets, coils
  • Chromium-molybdenum sheets
  • Steel sheets of duplex type. superduplex
  • Chromium-manganese-silicon sheets
  • Ferrite and martensitic chromium sheets
  • Nitriding sheets
  • Tool steel sheets for hot and cold working
  • Tool sheets for shallow and deep quenching
  • Steel sheets of high-speed steel
  • Titanium and titanium alloys sheets
  • Nickel plates for low temperature operation
  • Boiler sheets for operation at higher temperatures and for pressure equipment, ASTM A387 etc.
  • Bearing steel sheets
  • Superalloys sheets - nickel, chromium-nickel
  • Strip steel, Plate, Sheets of pure iron, 
  • Hydrogen-resistant sheets at high pressures
  • Steel Coils, Hot rolled coils, Cold Rolled coils

Cold-rolled sheets made from Stainless Steel, duplex, Heat-Resistant steel, Quenching and Temperting(QT) steel, Spring steel

  • Cold rolled carbon structural alloyed steel sheets 0.5 to 4.0mm thick. 
    • Formats: width 600 - 1500mm, length 2000 - 6000mm
  • Cold-rolled corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 0.3 to 15mm thick. 
    • Formats: width 360 - 2150mm, length 2000 - 8000mm


Surface of cold-rolled, corrosion-resistant, heat-resistant, galvanized sheets
2DPickledSmoothWith heat treatment
2BStraight and pickledSmoother than 2D
BA / 2RStraight and pickledMirror + Foil
2ESurface without scaleRough matte
2CSurface with scaleSmooth

Hot-rolled, stainless, boiler, carburizing, wear-resistant, bearing, carbon, tool, high speed plates

  • Hot-rolled sheets of carbon steel structural alloy 2 to 600mm thick. 
    • Formats: width 1000 - 3000mm, length 2000 - 12000mm
  • Hot-rolled, corrosion-resistant, acid-resistant, heat-resistant and stainless steel sheets 2 to 200mm thick. 
    • Formats: width 500 - 2500mm, length 2000 - 12000mm
Surface of hot-rolled, corrosion-resistant and heat-resistant sheets
1CSurface with scaleroughWith heat treatment
1DPickled surface
1ESurface without scaleNo heat treatment
1USurface with scale

Special surfaces of stainless and acid-resistant sheets available on request.

Special surfaces of corrosion resistant plates
3NSheet sanded with abrasive grain 80-120
4N / 4TKSheet sanded with abrasive grain 150-400
1K / 2KSheets polished to a gentle gleam
1P / 2PSheets polished for a mirror effect
1M / 2MDecorative sheets
SBBrushed sheets

Cutted elements from sheets/plates by saw, plasma, laser and waterjet

Cut or burned elements of sheet metal
Gas-plasma cut partsthickness up to 300mm
Laser cut partsthickness up to 30mm<
Saw cut elementsthickness up to 1000mm
Water cut elementsthickness up to 150mm


Hot rolled coils cold rolled coils

  • rings or discs with a hole burnt from sheets,
  • discs, full wheels burnt from sheets,
  • Forms, cubes, calcines burnt or cut from sheet metal,
  • burnt elements according to technical drawings,
  • flat bars cut from steel plates and forged blocks,