1.4913, X19CrMoNbVN11-1

1.4913, X19CrMoNbVN11-1 high-alloyed chrome-molybdenum Creep resisting martensitic stainless steel formulated for primary forming into wrought products, 1.4913, X19CrMoNbVN11-1 high-alloyed chrome-molybdenum Creep resisting steel martensitic stainless steel formulated for primary forming into wrought products, Using Bolts, Nuts, When working at elevated temperatures resistant to 600 ℃, characterized by good resistance and creep limit. 1.4913 is the Numeric designation for this material. X19CrMoNbVN11-1 is the Chemical designation.Other Spec. EN 10269-2006, EN 10302-2008, EN 10269-2013, EN 10088-1-2005, DIN EN 10269-2014

#1.4913 #X19CrMoNbVN11-1

1.4913, X19CrMoNbVN11-1 - Introduction and Application

1.4913, X19CrMoNbVN11-1 high-alloyed chrome-molybdenum Creep resisting martensitic stainless steel formulated for primary forming into wrought products, 1.4913, X19CrMoNbVN11-1 high-alloyed chrome-molybdenum Creep resisting steel martensitic stainless steel formulated for primary forming into wrought products, Using Bolts, Nuts, When working at elevated temperatures resistant to 600 ℃, characterized by good resistance and creep limit. 1.4913 is the Numeric designation for this material. X19CrMoNbVN11-1 is the Chemical designation.Other Spec. EN 10269-2006, EN 10302-2008, EN 10269-2013, EN 10088-1-2005, DIN EN 10269-2014

1.4913, X19CrMoNbVN11-1 - Chemical composition WT %

Grade	Chemical Composition %
Grade	C	Mn	Si	P	S	Cr	Ni	Mo	V	Nb	Al	W	B	N	Cu	Ti
EN 1.4913, X19CrMoNbVN11-1	0.17 - 0.23	0.4 - 0.9	Max 0.5	Max 0.025	Max 0.015	10.0 - 11.5	0.2 - 0.6	0.5 - 0.8	0.1 - 0.3	0.25 - 0.55	Max 0.02	Max 0.7	0.005 - 0.015	0.05 - 0.10	-	-
NF Z20CDNbV11, 56T5	0.18 - 0.25	0.3 - 0.8	0.1 - 0.5	Max 0.025	Max 0.015	10.0 - 12.0	Max 1.0	0.5 - 1.0	0.1 - 0.3	0.25 - 0.55	-	-	-	0.05 - 0.10	-	-
NF Z21CDNbV11	0.16 - 0.25	0.3 - 0.8	0.1 - 0.5	Max 0.030	Max 0.015	10.0 - 12.0	Max 1.0	0.5 - 1.0	0.1 - 0.3	0.25 - 0.55	-	-	-	0.05 - 0.10	-	-
ISO X18CrMnMoNbVN12, 1.4916	0.15 - 0.20	0.5 - 1.0	Max 0.5	Max 0.040	Max 0.030	10.0 - 13.0	Max 0.6	0.3 - 0.9	0.1 - 0.4	0.2 - 0.6	-	-	-	0.05 - 0.10	-	-
18Ch11MNFB, 18Х11МНФБ, 2Х11МФБН, ЕП291	0.15 - 0.21	0.6 - 1.0	Max 0.6	Max 0.030	Max 0.025	10.0 - 11.5	0.5 - 1.0	0.8 - 1.1	0.2 - 0.4	0.20 - 0.45	-	Max 0.2	-	-

Mechanical Property of 1.4913, X19CrMoNbVN11-1

1.4913, X19CrMoNbVN11-1 Mechanical properties acc. to EN 10088-1, EN 10269, EN 10302, Condition +QT

Tensile strength, Rm: 900 - 1050 MPa
The yield point, Re: > 750 MPa
Elongation, A:> 12%
Contraction, Z: >40%
Impact resistance, KV20℃: >20J
Modulus of elasticity, E: 216 GPa
Thermal capacity, cp20℃: 460 J * kg-1 * K-1
Thermal conductivity, λ: 24,0 W * m-1 * K-1
Linear expansion coefficient, α: 10,5 * 10-6 K-1

Heat Treatment of 1.4913, X19CrMoNbVN11-1

Properties	Temperature (℃)
Properties	50	100	150	200	250	300	350	400	450	500	550	600
p0.2 (MPa)	Max 726	Max 701	Max 676	Max 651	Max 643	Max 627	Max 610	Max 577	Max 544	Max 495	Max 412	Max 305

1.4913, X19CrMoNbVN11-1

Quick view

1.4913, X19CrMoNbVN11-1 - Introduction and Application

1.4913, X19CrMoNbVN11-1 - Chemical composition WT %

Mechanical Property of 1.4913, X19CrMoNbVN11-1

1.4913, X19CrMoNbVN11-1 Mechanical properties acc. to EN 10088-1, EN 10269, EN 10302, Condition +QT

Heat Treatment of 1.4913, X19CrMoNbVN11-1

Equivalent grades of 1.4913, X19CrMoNbVN11-1

In the steel grades above we can supply:

Category

Contact